home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Winzipper
/
Winzipper_ISO.iso
/
nt4.0 server
/
DRVLIB.NIC
/
STREAMER
/
@8FA2.ADF
< prev
next >
Wrap
Text File
|
1996-07-31
|
9KB
|
203 lines
;
; Version: 1.00
;
; (C) Copyright International Business Machines Corporation 1993
; All Rights Reserved
;
AdapterId 08FA2h
AdapterName "IBM Auto LANStreamer MC 32 Adapter"
NumBytes 4
FixedResources
POS[0]=1xxxxxxxb
POS[2]=10xx0xx1b
;Set media to UTP, set protocol to Token Ring, set preempt time=max,
;enable busmaster, set configuration flag
Begin NoDMA
NamedItem Prompt "Adapter Data Rate"
Choice "Autosense" POS[1]=11xxxxxxb
Choice "16 Mbps" POS[1]=10xxxxxxb
Choice "4 Mbps" POS[1]=00xxxxxxb
Help
"This Token-Ring Network Adapter can operate at two
different data rates: 4 Mbps or 16 Mbps. The choices
are Autosense, in which the adapter determines the data
rate, 16 Mbps data rate, and 4 Mbps data rate. The
assignment of the adapter data rate can be changed by
selecting 'CHANGE CONFIGURATION' and then using the
F5=Previous and the F6=Next keys."
NamedItem Prompt "Interrupt Level"
Choice "Interrupt 3" POS[1]=xx01xxxxb Int 03h
Choice "Interrupt 2" POS[1]=xx00xxxxb Int 02h
Choice "Interrupt 10" POS[1]=xx10xxxxb Int 0Ah
Choice "Interrupt 11" POS[1]=xx11xxxxb Int 0Bh
Help
"This option allows you to select the interrupt level that the
adapter will use to interrupt the system unit. The preferred
interrupt level is 3, but the adapter can operate on any of the
four levels if necessary. The assignment for this interrupt
level can be changed by selecting 'CHANGE CONFIGURATION' and
then using the F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and must be changed.
NOTE...If multiple Auto LANStreamer adapters are present in
the system, they must all be set to the same interrupt level."
NamedItem Prompt "Adapter I/O Address Range"
Choice "1C00-1CFF" POS[0]=x000111xb IO 01C00h-01CFFh
Choice "2000-20FF" POS[0]=x001000xb IO 02000h-020FFh
Choice "2400-24FF" POS[0]=x001001xb IO 02400h-024FFh
Choice "2800-28FF" POS[0]=x001010xb IO 02800h-028FFh
Choice "2C00-2CFF" POS[0]=x001011xb IO 02C00h-02CFFh
Choice "3000-30FF" POS[0]=x001100xb IO 03000h-030FFh
Choice "3400-34FF" POS[0]=x001101xb IO 03400h-034FFh
Choice "3800-38FF" POS[0]=x001110xb IO 03800h-038FFh
Choice "3C00-3CFF" POS[0]=x001111xb IO 03C00h-03CFFh
Choice "4000-40FF" POS[0]=x010000xb IO 04000h-040FFh
Choice "4400-44FF" POS[0]=x010001xb IO 04400h-044FFh
Choice "4800-48FF" POS[0]=x010010xb IO 04800h-048FFh
Choice "4C00-4CFF" POS[0]=x010011xb IO 04C00h-04CFFh
Choice "5000-50FF" POS[0]=x010100xb IO 05000h-050FFh
Choice "5400-54FF" POS[0]=x010101xb IO 05400h-054FFh
Choice "5800-58FF" POS[0]=x010110xb IO 05800h-058FFh
Choice "5C00-5CFF" POS[0]=x010111xb IO 05C00h-05CFFh
Choice "6000-60FF" POS[0]=x011000xb IO 06000h-060FFh
Choice "6400-64FF" POS[0]=x011001xb IO 06400h-064FFh
Choice "6800-68FF" POS[0]=x011010xb IO 06800h-068FFh
Choice "6C00-6CFF" POS[0]=x011011xb IO 06C00h-06CFFh
Choice "7000-70FF" POS[0]=x011100xb IO 07000h-070FFh
Choice "7400-74FF" POS[0]=x011101xb IO 07400h-074FFh
Choice "7800-78FF" POS[0]=x011110xb IO 07800h-078FFh
Choice "7C00-7CFF" POS[0]=x011111xb IO 07C00h-07CFFh
Choice "8000-80FF" POS[0]=x100000xb IO 08000h-080FFh
Choice "8400-84FF" POS[0]=x100001xb IO 08400h-084FFh
Choice "8800-88FF" POS[0]=x100010xb IO 08800h-088FFh
Choice "8C00-8CFF" POS[0]=x100011xb IO 08C00h-08CFFh
Choice "9000-90FF" POS[0]=x100100xb IO 09000h-090FFh
Choice "9400-94FF" POS[0]=x100101xb IO 09400h-094FFh
Choice "9800-98FF" POS[0]=x100110xb IO 09800h-098FFh
Choice "9C00-9CFF" POS[0]=x100111xb IO 09C00h-09CFFh
Choice "A000-A0FF" POS[0]=x101000xb IO 0A000h-0A0FFh
Choice "A400-A4FF" POS[0]=x101001xb IO 0A400h-0A4FFh
Choice "A800-A8FF" POS[0]=x101010xb IO 0A800h-0A8FFh
Choice "AC00-ACFF" POS[0]=x101011xb IO 0AC00h-0ACFFh
Choice "FC00-FCFF" POS[0]=x111111xb IO 0FC00h-0FCFFh
Help
"This option allows you to select the micro channel I/O
address range of the adapter. For micro channel I/O
cycles, this Token Ring Network adapter is selected when the
micro channel I/O address is within a 256 byte region. If more
than one adapter is used in your computer, each adapter must be
assigned a separate I/O address range. The assignment for the
I/O address range can be changed by selecting 'CHANGE CONFIGURATION'
and then using the F5=PREVIOUS and the F6=NEXT keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the I/O address range
must be changed. If a conflict continues to exist, you may
need to change the assignments for other options that are in
your computer to resolve the conflict."
NamedItem Prompt "Remote Program Load Address Range"
Choice "Disabled" POS[1]=xxxx0000b
Choice "C0000-C3FFF" POS[1]=xxxx0001b Mem 0C0000h-0C3FFFh
Choice "C4000-C7FFF" POS[1]=xxxx0011b Mem 0C4000h-0C7FFFh
Choice "C8000-CBFFF" POS[1]=xxxx0101b Mem 0C8000h-0CBFFFh
Choice "CC000-CFFFF" POS[1]=xxxx0111b Mem 0CC000h-0CFFFFh
Choice "D0000-D3FFF" POS[1]=xxxx1001b Mem 0D0000h-0D3FFFh
Choice "D4000-D7FFF" POS[1]=xxxx1011b Mem 0D4000h-0D7FFFh
Choice "D8000-DBFFF" POS[1]=xxxx1101b Mem 0D8000h-0DBFFFh
Choice "DC000-DFFFF" POS[1]=xxxx1111b Mem 0DC000h-0DFFFFh
Help "This Token Ring Network adapter Remote Program Load (RPL)
memory space is relocatable within Micro Channel memory space.
The adapter memory space may be located on any 16K boundary
from hex 000C 0000 to 000D C000.
The address assignment can be changed by selecting
'CHANGE CONFIGURATION' and then using the
F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and must be changed."
NamedItem Prompt "Streaming Data Select"
Choice "Enabled" POS[3]=xx1xxxxxb
Choice "Disabled" POS[3]=xx0xxxxxb
Help "This Token Ring Network Adapter can operate
with or without Data Streaming. For best
performance, select <Enabled>. This selection
can be changed by selecting 'CHANGE CONFIGURATION'
and then using the F5=Previous and the F6=Next keys."
NamedItem Prompt "Fairness"
Choice "Fairness ON " POS[3]=xxx0xxxxb
Choice "Fairness OFF" POS[3]=xxx1xxxxb
Help
"Bus Arbitration Fairness controls whether the adapter will share
the bus equitably with other devices or retain control of the bus
as needed. Under normal circumstances, select <ON>. The assignment
for fairness can be changed by selecting 'CHANGE CONFIGURATION'
and then using the F5=Previous and the F6=Next keys."
NamedItem Prompt "Arbitration Level"
Choice "Level 1" POS[3]=xxxx0001b arb 01h
Choice "Level 2" POS[3]=xxxx0010b arb 02h
Choice "Level 3" POS[3]=xxxx0011b arb 03h
; Choice "Level 4" POS[3]=xxxx0100b arb 04h
Choice "Level 5" POS[3]=xxxx0101b arb 05h
Choice "Level 6" POS[3]=xxxx0110b arb 06h
Choice "Level 7" POS[3]=xxxx0111b arb 07h
Choice "Level 8" POS[3]=xxxx1000b arb 08h
Choice "Level 9" POS[3]=xxxx1001b arb 09h
Choice "Level A" POS[3]=xxxx1010b arb 0Ah
Choice "Level B" POS[3]=xxxx1011b arb 0Bh
Choice "Level C" POS[3]=xxxx1100b arb 0Ch
Choice "Level D" POS[3]=xxxx1101b arb 0Dh
Choice "Level E" POS[3]=xxxx1110b arb 0Eh
Help "This Token Ring Network adapter
can operate on one of thirteen arbitration levels: 1, 2, 3 or
5 thru E. If more than one adapter is used in your computer,
each adapter must be assigned a separate arbitration level.
Assignment for the arbitration level can be changed by
selecting 'CHANGE CONFIGURATION' and then using the
F5=Previous and the F6=Next keys.
If an assignment has an asterisk (*) by it, it is in
conflict with another assignment and the arbitration level
must be changed. If a conflict continues to exist, you may
need to change the assignments for other adapters or options
that are in your computer to resolve the conflict."
NamedItem Prompt "Parity Enable/Monitor Feedback"
Choice "Parity OFF/Monitor OFF" pos[2]=xxxxx00xb
Choice "Parity ON /Monitor OFF" pos[2]=xxxxx10xb
Choice "Parity OFF/Monitor ON " pos[2]=xxxxx01xb
Choice "Parity ON /Monitor ON " pos[2]=xxxxx11xb
Help "Micro Channel Parity Enable/Monitor Slave devices feedback signal:
This Token Ring Network adapter provides the capability of
generating and checking data and address parity. In
addition, this adapter also provides the capability
of monitoring slave device's Selected Feedback Return
Exception signals during DMA operations. These
assignments can be changed by selecting 'CHANGE CONFIGURATION'
and then using the F5=Previous and the F6=Next keys."
End